iDrawFast

Pair your devices with a QR code, and fix common problems

Updated

Pairing connects two or more browsers to the same live board. It takes a QR code or a link, and both devices remember the connection afterwards. This guide covers the steps, the alternatives to scanning, and what to do when something does not connect.

How pairing works

Choosing Connect device creates a board with a random 256-bit key and shows it as a QR code and a link. A device that opens the link joins that board. The key sits in the part of the link after the “#”, which browsers do not send to the website, and it is removed from the address bar after joining. Devices then pass strokes to each other through a relay that does not store them.

Three ways to join

  1. Scan the QR code with the other device’s camera app and open the link.
  2. Scan inside iDrawFast. Open Connect device on the second device and choose Scan another board, then point its camera at the first device’s QR code.
  3. Use the link. Choose Copy link and send it to the other device by message or AirDrop, then open it there. Or, in Scan another board, paste it into the “Or paste a board link” field.

Troubleshooting

Ending a connection

Anyone with the link can join, so share it carefully. To stop, choose Disconnect this device; that device forgets the board. Connecting again creates a brand-new link, which makes the old one useless.

Questions people ask

Do both devices need the same Wi-Fi?

No. On the live site, each device just needs an internet connection.

Does the QR code expire?

No. A board link works until you disconnect and create a new one. Anyone who has it can join.

Can I pair more than two devices?

Yes, up to eight devices can share a board.